No products in the cart.
Spinning Ring Flarer
£32.00 exc. VAT
Designed and Manufactured at the request of Andrew Berry, The Durston Spinning Ring Flarer, the perfect tool for flaring bands evenly. This new tool not only saves time but will create a perfectly even concave shape by simply putting the band in the device and tightening to achieve the desired result.
Perfectly equal flared edges for making spinning rings every time with no hammering.
Using the Spinning Ring Maker is easy, secure with a vice, insert the band and tighten until you achieve the desired results.
The Spinning Ring Maker will work on rings with an inside diameter of 13mm – 28mm and as an example, a minimum width of 10mm on a z size ring.
UK size E to Z+6
US size 2 to 16
| Weight | 0.15 kg |
|---|---|
| Dimensions | 15 × 15 × 15 cm |
Spinning Ring Flarer FAQs
Q: My flared edges are coming out uneven / incorrectly?
Getting an even flare using the Durston flaring tool can be sometimes a bit tricky. It is so important not to use too much solder on your joint and to have the most perfect solder joint too. If you have too much solder then it will thicken the metal making it flat unevenly. If you have to remove your excess solder then you may inadvertently thin out your metal and so that area of metal will bend and flat easier than the rest.LED
The ring must be evenly annealed so you may need to anneal it several times before you start to flat it.
Add a little oil to the faces of the flare, the areas that are going to make the flare as the metal will slide easier.
When you assemble the ring in the flare make sure that it is central and even in the flare or you will get an uneven flare. Start to tighten the flare slowly. Make sure the flat is starting to flare evenly. Stop tightening take the ring out of the flare and turn it over and start to tighten it back up. By slowly tightening it and then repositioning the ring, you should get an even flare. Turning over and repositioning the ring several times will ensure that if there are any unevenness in the flare, this is evened out around the ring.
If the ring has flared more on one edge then anneal the edge that has not flared only and retry. This is to make that unflared edge soft whilst keeping the flared edge hard (work hardened) so it flares out. Once the edges have flared evenly you can evenly anneal the whole ring to get a more drastic flare.
Ordering FAQs
Do you ship worldwide?
Yes we ship worldwide, please add items to the checkout and enter your address for a shipping cost.
Can I place my order over the phone?
You are welcome to call or email for help or information on any of our products but we are only able to accept orders and payments via our website, this allows us to give a better service and ensure all your details are correct.
How long does delivery take?
We aim to ship all orders within a few days of ordering, depending on where you are in the world it may take only a couple of days or up to a week to arrive. We use DPD for UK deliveries and DHL for worldwide shipments. Larger orders such as Benches or heavy Rolling Mills will be sent on a pallet.
Related products
-35%
£299.65 exc. VAT
SKU: 1302
£50.00 exc. VAT
SKU: 2126
£11.00 exc. VAT
SKU: 2050
-30%
£275.10 exc. VAT
SKU: 1301