The Double Rolling Mills from Durston Tools features two sets of rolls; one for flat rolling and the other grooved for the square wire rolling. For additional safety, all gearing is covered with plastic housing and the large, easy-to-read calibrated discs and guide plates ensure safe operation through this mill’s long lifetime.
These exceptional double rolling mills have two sets of rolls, the top set for flat rolling and the bottom set grooved for square wire rolling. Both sets of rolls also have extension rollers. The top rolls incorporate half rounds and the bottom rolls an additional half round. The rolling mill is supplied with two turning levers. The first is used for heavy rolling, and this includes a gear reduction. The second turning lever can be used for lighter rolling at twice the speed with a gear ratio. Lever changeover takes only a few seconds. Safety features include all gearing being covered with plastic housing. The mill itself is constructed from a single piece of cast iron to maximise rigidity and strength, and all rollers are induction hardened to 64RC to ensure your rolls lasts a lifetime. This is an exceptional workhorse of a rolling mill and will offer years of service.