Durston Pattern Plates, cut shapes with ease using this Pancake/Pattern Die
Made from quality hardened steel, suited for use with a press with materials up to 0.5mm thickness.
Total Plate Size 127mm x 63mm x 2.5mm
Maximum cutting thickness can vary depending on the material used. As a guide we recommend 0.5mm as a max thickness for non ferrous metals, you may be able to go a little higher with soft metals like Aluminium. Harder Metals the max thickness will be reduced.
Our pancake dies are designed for use with a Hydraulic Press, however they can also be used with an Arbour Press or Planishing Press for thinner materials.
Additional Information |
Weight | 0.3 kg |
---|---|
Dimensions | 12 × 10 × 12 cm |
Product Weight (kg) | 0.16 |